Conical Co Current Twin-Screw PVC Extruder

Back

Product details:

  1. Performance introduction

"Conical Co current Twin-Screw PVC Extruder " is national patent product researched and developed by our company (patent No.: 2005101189153), and the technology has reached international advanced standards. The machine not only kept the character of high extruding pressure, but also reached the good plastic performance. In addition,it reached the effect of higher mixing, higher-cuttinging, and higher plasticizing. The result of several tests proved: the output of this machine is 50% more than other granulators existing on the current market,and the consumption of electricity is above 30% less.Besides,it has the advantages of smaller noise and longer service life of screws.Its the ideal equipment for processing soft and hard PVC granulate production (30% return materials can be mixed).

Take "65- Conical Co current Twin-Screw Granulator" as an example: (screw effective length: 2800 mm, motor power: 75 KW) can achieve the maximum output of 580 KG / h, and the hourly consumption of electrical power is 1 / 3 of the mainly motor power, about 25 KW. (the maximum output of "65-Conical Counter Rotating Twin-Screw PVC Granulator" on the market today is only 240 KG / h, and the motor power consumption is more than 35 KW.) Facts have proved that: the output of "SJSZ-65 Conical Co current Twin-Screw PVC Granulator" is equal to "92-Conical Counter Rotating Twin-Screw PVC Granulator", and the power consumption is the same as that of "55-Conical Counter Rotating PVC Granulator", fully reflects super advantages of high yield and low consumption!

  1. Technical parameters:
  1. Screw dia. Φ65/φ130 (mm)
  2. Screw turning the same
  3. Screw speed 0-88m/min
  4. Screw effective length 2800mm
  5. Production capacity more than 500 kg / h
  6. Main motor 75kw / band 4
  7. Hopper capacity 210L
  8. Screw center height 1000mm
  9. External dimensions (length x width x height) 6183 × 1100 × 2500m
  1. Configuration Introduce
  1. Fragile place of the screw is alloy sprayed
  2. Barrel inside is alloy sprayed
  3. Provide main motor and all transducers with "Fuji"
  4. Bearings of distribution boxes all use Japan NSK, IKO
  5. Electrical cabinet temperature control tables all use Japan Fuji
  6. All LV electrical apparatus use ABB
  7. Motor in domestic famous brands "Pioneer"
  1. Item supply range
  1. 65- Conical co current double screw granulator 1
  2. Electrical control system 1 set
  3. Attached spare parts and tools 1 set
  4. Attached documents 1 set
  1. The crew facilities technical requirements

Electricity demand:

  1. Total power of the crew: 120 KW
  2. Voltage 380 V, frequency 50 Hz
  1. Attached spare parts and tools
  1. Screwdriver: 4
  2. 75 open end wrench: 1
  3. Special copper bar: 1
  4. Inside hexagonal wrench: 1
  5. Exhaust room "O" ring: 3
  6. Special instruments for removing the screw: 1 set
  7. Box wrench 27-30: 1
  8. Box wrench 36-41: 1
  1. Attached documents
  1. Product qualification certificate
  2. Circuit diagram
  3. Mainframe instruction
  4. Frequency converter instruction
  5. Temperature controller instruction
  6. Pressure cell instruction
  1. The above configuration is only for your reference.
  1. Installation, debugging and maintain one year for free, long term maintenance

Product details:

Full name of TPU: Thermoplastic polyurethane Eastover total polymer is an environmental non-toxic material, it can be divided into polyester and polyether two categories, the application of the products are widely, TPU will replace of PVC.

TPU is composite material between rubber and plastic. It has such kind of characters: wide hardness range, excellent wear resistance, high strength, high load capacity, high tear strength and excellent oil resistance or water resistance, ozone resistance, radiation resistance,low temperature resistance, mold-resistant, salt spray resistance etc.

Product is used in the fields of machinery, automobile, textile, chemical, mining, petrochemicals, communications, and so on . Used in the manufacture of cable sheathing, film, breathe waterproof drench film, sheet, high and low voltage control, air bags, seals, dust-proof seals, dust cap, beneficiation sieve plate, cushion, casters, pulley, and others.

However, the processing requirements of TPU is relatively complex.Almost all the granulator on the current domestic plastics market are impossible for TPU granulating.However, " Conical Cocurrent Twin-Screw Granulator" researched and developed by our company can solve the problem perfectly.

  1. Products competitive advantages:
  • High Yield
  • low consumption
  • small noise
  • long service life
  • National patent inventions
  1. Product introduction:

"Conical Cocurrent Twin-Screw Granulator" is researched and developed by our company(Patent No.: 2005 1 01189153), of which the technology has been leading the international level!

The product comprehensively optimized the advantages of the existing 2 kinds of twin-screw models ("Conical Counter Rotating" and "Parallel Co Current"), not only keep the character of high extruding pressure of the former, but also reached the good plastic performance of the latter. In addition,it reached the effect of higher mixing, higher-kneading, higher plasticizing. The result of several tests proved: the output of this machine is 50% more than other granulators existing on the current market,and the consumption of electricity is above 30% less.Besides,it has the advantages of smaller noise and longer service life of screws.The domestic famous experts once said that the machines may replace the two existing twin-screw granulators,mastering the granulator market.

Take "65-Conical Cocurrent Twin-Screw TPU Granulator" as an example:

  1. Technical parameters:
  1. Screw: φ65/φ130, made of 38CrMoAlA, nitride processed, dual- alloy materials in easy-damaged places, making sure the quality and longer service life.
  2. Barrel: 38CrMoAlA with nitride processed.
  3. Output: more than 400 kg / h.
  4. Heating circle: There are 12 water-cooled heating circles.
  5. Filters: use oil-pressure net change installation.
  6. Exhaust installation: use vacuum exhaust system.
  7. Main motor: 75 kw.
  8. Electrical appliances: ABB electrical appliances.
  9. Bearings: Japanese original import bearings.